You can always create additional SSIDs, but each AP or AP group can only broadcast a total of four SSIDs, per band, at a time. You can have up to four 2.4 GHz and up to four 5 GHz networks, or four dual-band SSIDs. You can stretch this to 8 total SSIDs if you limit your networks to a single band. Note: UniFi has a limit of 4 SSIDs per band, per AP group. More on DTIM below, under the 802.11 Rate and Beacon Controls section.Īllows grouping of APs and selecting which will broadcast this Wi-Fi network. Improves the connection reliability of IoT devices.Įffect: Forces DTIM settings to default values of 1 for 2.4 GHz and 3 for 5 GHz.
#OPTIMIZE MAC NETWORK SETTINGS MANUAL#
You can also create a separate 2.4 GHz and 5 GHz network if you want guaranteed, manual control over which band is used by which device. There are several ways to combat this - usually adjusting AP placement, lowering 2.4 GHz transmit power, enabling band steering, fast roaming, or the “high performance devices” settings can be effective. Note: Dual-band SSIDs can lead to roaming issues, with some clients not using 5 GHz, or not roaming to the nearest AP. UniFi’s Advanced Wi-Fi Settings Wi-Fi BandĢ.4 GHz: Slower, longer range, more wall penetration.ĥ GHz : Faster, shorter range, less wall penetration.Įffect: This setting controls which band your Wi-Fi network broadcasts on.
If you want more, the good stuff is hidden under the advanced tab. If you want a basic network, that’s all you need to do. Otherwise, you can save it, and it will be added to all of your APs by default.
#OPTIMIZE MAC NETWORK SETTINGS PASSWORD#
If you don’t want to use the default of a WPA2 password for the network, open the advanced options and scroll down to the “Security” tab and modify the settings there. Give it a name (SSID), password, and specify which network it is going to use. If the network you want to use for Wi-Fi has been created, go to Settings → Wi-Fi → Add New Network. This can be done by modifying the default LAN, or by creating a new network under the Networks tab. Before diving into wireless settings, setup your networks and VLANs first. This is commonly used for guest or IoT devices, or separating devices or areas into different network groups. Creating additional networks allows you to segment and restrict traffic. Internet controls your WAN connections, including VLANs, IP addresses, and Smart Queues for QoS.īy default, UniFi has one LAN network, which is used for all wired and wireless connections. Networks controls your LAN networks and VLANs, including DHCP, DNS, and IP addresses. Wi-Fi controls your wireless connections, including SSID, password, and other advanced settings. In the UniFi interface, network settings are divided into Wi-Fi, Networks, and Internet.
0 kommentar(er)
